Tax included and shipping calculated at checkout

Drawer menu
Tax included and shipping calculated at checkout
Load it before bed and there are still glowing coals to catch in the morning. No 3am trip to the stove.
Side panels cut the clearance to combustible materials, so it fits rooms other stoves of this output cannot.
Non catalytic combustion means nothing degrades and nothing needs replacing every few seasons.
A glass airwash system keeps soot off the ceramic glass, so you actually see the fire you paid for.
A 5/16 inch steel top reinforced with a stainless heat shield handles decades of hard heat cycles.
Engineered and built by Drolet near Quebec City, and covered by a limited lifetime warranty.
Combining respect for the environment and performance, the Austral III is ideal for heating spaces up to 2,300 ft². This non-catalytic appliance is among the most ecological on the market with a particle emission rate of 0.95 g/h. Its maximum power of 90,000 BTU/h will keep you warm all winter long. Its firebox is specifically designed for loading of logs over depth.
Any installation must be done according to the data and drawings detailed in the owner’s manual.
Every figure below is the manufacturer specification for this model.
| Fuel type | Dry cordwood (16" recommended) | Maximum overall heat output rate | 57,041 BTU/h (16.72 kW) |
| Heating area | 900 - 2,300 ft² | Average overall efficiency - dry cordwood (HHV) | 71.1 % |
| Overall firebox volume | 3.3 ft³ | Average overall efficiency - dry cordwood (LHV) | 76.6 % |
| EPA loading volume | 2.67 ft³ | Optimum efficiency | 78 % |
| Maximum burn time | 10 h | Optimum heat transfer efficiency | 74 % |
| Maximum heat output - dry cordwood | 90,000 BTU/h (26.4 kW) | Average particulate emission rate | 0.95 g/h |
| Minimum overall heat output rate | 15,841 BTU/h (4.64 kW) | Average CO | 61.3 g/h |
| Alcove installation approved | Yes | Door opening size (Height) | 12" |
| Mobile home approved | Yes, with fresh air intake | Glass type | Ceramic glass |
| Certified according to applicable standards | By an accredited laboratory (CAN) | Glass surface - W x H | 14 5/8" x 11 3/4" |
| Overall dimension (Width) | 23 3/4" | Steel thickness-body | 3/16" |
| Overall dimension (Height) | 32 1/8" | Steel thickness-top | 5/16" |
| Overall dimension (Depth) | 32 1/2" | Firebox size (Width) | 19" |
| Premium quality blower included (CFM) | Optional | Firebox size (Height) | 14 1/8" |
| Combustion technology | Non-catalytic | Firebox size (Depth) | 21" |
| Stainless-steel secondary-air system | Yes | Log positioning | Loading over depth |
| Flue outlet diameter | 6" | Maximum log length | 20" |
| Distance - center of the flue outlet to back unit | 7 1/2" | Firebox lined with refractory bricks | Yes |
| Distance - center of the flue outlet to side unit | 11 7/8" | Baffle type | High quality vermiculite |
| Recommended chimney diameter | 6" | Canadian Standard (emissions) | CSA B415.1-10 |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) | Canadian Standard (safety) | ULC S627 |
| Minimum chimney height | 12' | Warranty | Limited lifetime |
| Door type | Single, glass with cast iron frame | Shipping weight | 410 lb (186 kg) |
| Door opening size (Width) | 16" | Approved as add-on to an existing furnace | No |
| Canada | United States | |||
|---|---|---|---|---|
| Single Wall Pipe | Double Wall Pipe | Single Wall Pipe | Double Wall Pipe | |
| Back wall | 14 1/2″ | 7 1/2″ | 14 1/2″ | 7 1/2″ |
| Side wall | 20″ | 20″ | 20″ | 20″ |
| Corner | 12″ | 10″ | 12″ | 10″ |
| Base of the unit to ceiling | 84″ | 84″ | 84″ | 84″ |
Read these before you order. Clearances and venting requirements decide whether the appliance fits your space.
PDFInstallation and operation requirementsClearances, venting, and how to run it correctlyPDFOwner manualSafety notifications and general informationPDFAppliance dimensionsFull drawing, measure your alcove or hearth against itEvery wear part for this stove, from baffles and firebricks to door gaskets and glass, listed by part number.
↗Browse AUSTRAL III partsGenuine Drolet partsHeating area depends on your insulation, ceiling height, and floor plan, not just square footage.
↗How to calculate your heating areaA 2 minute guide, so you buy the right size onceThat is the maximum, in a well insulated open layout. A closed floor plan or a drafty old house heats less. If your space is chopped into rooms, size up or plan for a blower.
Many appliances this size are certified for mobile home and alcove installation, but it is model specific. Confirm it in the installation guide above before you order. A fresh air intake kit is required for mobile homes.
Clearance to combustible materials depends on the model and on whether heat shields or side panels are fitted. Exact numbers are in the dimensions drawing and the owner's manual above. Measure before you order.
Most of the wood appliances we carry are non catalytic, meaning there is no catalytic element to degrade, clean, or replace. The owner manual above confirms it for this model.
Drolet backs this appliance with its manufacturer warranty. We are an authorized dealer, so your warranty is honored directly by the manufacturer.
This one is on pre-order. Estimated back in stock 2026-10-07, and it ships as soon as it lands. Shipping is calculated at checkout.